The assumptions of the new model are similar to that of the existing vacuum distill model. Air leaks into the system under vacuum and becomes saturated with solvent vapors. With the vacuum distill model it is assumed that condensation of some fraction of these vapors occurs in the primary condenser and any uncondensed vapor is exhausted to the atmosphere (via control devices, if any). With this model, the vacuum jet scrubber acts as the final control device, assuming that a vacuum jet is being used to evacuate the system. The vacuum jet scrubber condenses vapors, which remain uncondensed by the primary condenser, through direct contact heat exchange with the scrubber water.
Assembly: Sage4 (in Sage4.dll)