Sage Modeling and Simulation Library

ITemperatureController..::..SetThermalConductance Method

This sets a value for thermal conductance between the compartment containing the heating/cooling medium and the compartment containing the mixture in a vessel at a certain level. For example, SetThermalConductance(0.30,150) sets the thermal conductance to 150 Watts per degree kelvin difference between the heating/cooling medium and the mixture, when the mixture fills the vessel to it's '30% FULL' line.

Namespace:  Highpoint.Sage.Materials.Thermodynamics
Assembly:  Sage4 (in Sage4.dll)


void SetThermalConductance(
	double level,
	double val


Type: Double
Describes at what level (0.30 equates to 30% FULL) the datum is correct.
Type: Double
Thermal conductance, in Watts per degree kelvin.