Sage Modeling and Simulation Library

PressureTransferModel..::..PressureTransfer Method

This model is used when any material (solid or liquid) is added to a vessel already containing a liquid or vapor VOC, and the vapor from that vessel is thereby emitted by displacement. The model assumes that the volume of vapor displaced from the vessel is equal to the amount of material added to the vessel. In addition, the vapor displaced from the vessel is saturated with the VOC vapor at the exit temperature.

Namespace:  Highpoint.Sage.Materials.Chemistry.Emissions
Assembly:  Sage4 (in Sage4.dll)

Syntax


public void PressureTransfer(
	Mixture initial,
	out Mixture final,
	out Mixture emission,
	bool modifyInPlace,
	Mixture materialToAdd,
	double controlTemperature
)

Parameters

initial
Type: Highpoint.Sage.Materials.Chemistry..::..Mixture
The mixture as it exists before the emission.
final
Type: Highpoint.Sage.Materials.Chemistry..::..Mixture%
The resultant mixture after the emission.
emission
Type: Highpoint.Sage.Materials.Chemistry..::..Mixture%
The mixture emitted as a result of this model.
modifyInPlace
Type: Boolean
If true, then the initial mixture is returned in its final state after emission, otherwise, it is left as-is.
materialToAdd
Type: Highpoint.Sage.Materials.Chemistry..::..Mixture
The material to be added in the fill operation.The volume property of the material will be used to determine volume.
controlTemperature
Type: Double
The control, or condenser, temperature in degrees Kelvin.