Sage Modeling and Simulation Library

AirDryModel..::..AirDry Method

This model is used to calculate the emissions associated with drying solid product in a dryer with no emission control equipment. Thus, the model assumes that the entire solvent content of the wet product cake is emitted to the atmosphere. The calculation of the emission is then a simple calculation based on the expected, or measured, dry product weight and the expected, or measured, wet cake LOD (loss on drying).

Namespace:  Highpoint.Sage.Materials.Chemistry.Emissions
Assembly:  Sage4 (in Sage4.dll)


public void AirDry(
	Mixture initial,
	out Mixture final,
	out Mixture emission,
	bool modifyInPlace,
	double massOfDriedProductCake,
	double controlTemperature,
	Hashtable materialGuidToVolumeFraction


Type: Highpoint.Sage.Materials.Chemistry..::..Mixture
The initial mixture that is dried.
Type: Highpoint.Sage.Materials.Chemistry..::..Mixture%
An out-param that provides the mixture that results.
Type: Highpoint.Sage.Materials.Chemistry..::..Mixture%
An out-param that provides the emitted mixture.
Type: Boolean
True if the initial mixture provided is to be modified as a result of this call.
Type: Double
Kilogram mass of the post-drying product cake.
Type: Double
Control (or condenser) temperature, in degrees Kelvin.
Type: Hashtable
A hashtable with the guids of materialTypes as keys, and the volumeFraction for that material type as values. VolumeFraction is the percent [0.0 to 1.0] of that material type in the offgas.